Soldering & Rework Stations Archives - SMT Solder Tips

TMT-2000PSSoldering Iron Power Supply 100-240VAC

admin — Thu, 30 Apr 2020 21:06:29 +0000

The TMT-2000S is based on Curie Heat Technology which responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material. Power Supply Only.

Curie Heat Technology operating at 470KHz.
Maximum flexibility, allows the use of K, P and S Series tips.
Extremely compact, weighs just 1.3KG.
No calibration or operator training required.
No additional coil assembly costs.

TMT-2000S SPECIFICATIONS

Input Line Voltage:	100-240 VAC, 55W
Tip to Ground Potential:	2mV, true RMS 50-500Hz
Tip to Ground Resistance:	<2 Ohms DC
Idle Temperature Stability:	+/- 1.1°C (2°F)
Maximum Enclosure Temperature:	50°C (122°F)
Fuse:	250V 1A
Output Power (Maximum):	50 Watts RF
Output Frequency:	470 Khz
Size (W x H x D):	110mm x 155mm x 92mm
Weight:	1.3 KG
Input Line Frequency:	50/60 Hz

CERTIFICATION MARKS:

PACKING LIST

TMT-2000PS	Power Supply

SYSTEM CONFIGURATIONS

TMT-2000S-K with K Series Tip

TMT-2000S-P with P Series Tip

TMT-2000S-SM with S Series Tip

TMT-2000S-KM with K Series Tip

TMT-2000S-PM with P Series Tip

K SERIES – TIP CARTRIDGES (For use with TMT-2000S-K, TMT-2000S-KM)

P SERIES – TIP CARTRIDGES (For use with TMT-2000S-P, TMT-2000S-PM)

S SERIES – TIP CARTRIDGES (For use with TMT-2000S-SM)

The post TMT-2000PS
Soldering Iron Power Supply 100-240VAC appeared first on SMT Solder Tips.

TMT-2000S-PM Soldering Systemw/SHP-PM 100-240VAC

admin — Thu, 30 Apr 2020 21:00:10 +0000

Curie Heat Technology operating at 470KHz.

Maximum flexibility, allows the use of K, P and S Series tips.

Extremely compact, weighs just 1.3KG.

No calibration or operator training required.

No additional coil assembly costs.

TMT-2000S SPECIFICATIONS

Input Line Voltage:	100-240 VAC, 55W
Tip to Ground Potential:	2mV, true RMS 50-500Hz
Tip to Ground Resistance:	<2 Ohms DC
Idle Temperature Stability:	+/- 1.1°C (2°F)
Maximum Enclosure Temperature:	50°C (122°F)
Fuse:	250V 1A
Output Power (Maximum):	50 Watts RF
Output Frequency:	470 Khz
Size (W x H x D):	110mm x 155mm x 92mm
Weight:	1.3 KG
Input Line Frequency:	50/60 Hz

CERTIFICATION MARKS:

PACKING LIST

TMT-2000PS	Power Supply
SHH-4	Soldering Handpiece Holder
SHP-PM¹	Soldering Handpiece for P Series Tips
RMP-1	Tip Removal Pad
CC-1	Connection Cable
BC-1	Brass Curls
SPG-1	Sulphide Free Sponge
¹The handpiece will vary based on system configuration.

SYSTEM CONFIGURATIONS

TMT-2000S-K with K Series Tip

TMT-2000S-P with P Series Tip

TMT-2000S-SM with S Series Tip

TMT-2000S-KM with K Series Tip

TMT-2000S-PM with P Series Tip

P SERIES – TIP CARTRIDGES (For use with TMT-2000S-P, TMT-2000S-PM)

The post TMT-2000S-PM Soldering System
w/SHP-PM 100-240VAC appeared first on SMT Solder Tips.

TMT-2000S-SM Soldering Systemw/SHP-SM 100-240VAC

admin — Thu, 30 Apr 2020 20:57:05 +0000

Curie Heat Technology operating at 470KHz.
Maximum flexibility, allows the use of K, P and S Series tips.
Extremely compact, weighs just 1.3KG.
No calibration or operator training required.
No additional coil assembly costs.

TMT-2000S SPECIFICATIONS

Input Line Voltage:	100-240 VAC, 55W
Tip to Ground Potential:	2mV, true RMS 50-500Hz
Tip to Ground Resistance:	<2 Ohms DC
Idle Temperature Stability:	+/- 1.1°C (2°F)
Maximum Enclosure Temperature:	50°C (122°F)
Fuse:	250V 1A
Output Power (Maximum):	50 Watts RF
Output Frequency:	470 Khz
Size (W x H x D):	110mm x 155mm x 92mm
Weight:	1.3 KG
Input Line Frequency:	50/60 Hz

CERTIFICATION MARKS:

PACKING LIST

TMT-2000PS	Power Supply
SHH-4	Soldering Handpiece Holder
SHP-SM¹	Soldering Handpiece for S Series Tips
RMP-1	Tip Removal Pad
CC-1	Connection Cable
BC-1	Brass Curls
SPG-1	Sulphide Free Sponge
¹The handpiece will vary based on system configuration.

SYSTEM CONFIGURATIONS

TMT-2000S-K with K Series Tip

TMT-2000S-P with P Series Tip

TMT-2000S-SM with S Series Tip

TMT-2000S-KM with K Series Tip

TMT-2000S-PM with P Series Tip

S SERIES – TIP CARTRIDGES (For use with TMT-2000S-SM)

The post TMT-2000S-SM Soldering System
w/SHP-SM 100-240VAC appeared first on SMT Solder Tips.

TMT-9000PS-2 Soldering Iron Power Supply 220v

admin — Thu, 30 Apr 2020 20:44:11 +0000

The TMT-9000S is based on Curie Heat Technology which responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material.

High thermal recovery & performance.
13.56MHz power supply with built-in LCD display.
Dual switchable soldering ports.
No calibration or operator training required.
No additional coil assembly costs.

TMT-9000S SPECIFICATIONS

Input Line Voltage:	TMT-9000PS-1	100-110 VAC
	TMT-9000PS-2	220-240 VAC
Tip to Ground Potential:	2mV, true RMS 50-500Hz
Tip to Ground Resistance:	<2 Ohms DC
Idle Temperature Stability:	+/- 1.1°C (2°F)
Ambient Operating Temperature:	10-40°C (50°F -104°F)
Maximum Enclosure Temperature:	50°C (122°F)
Fuse:	TMT-9000PS-1	125V 1A
	TMT-9000PS-2	250V 0.5A
Output Power (Maximum):	40 Watts RF
Output Frequency:	13.56 MHz
Size (W x H x D):	212.4mm x 118mm x 132mm
Weight:	3.47 KG
LCD display:	60.0mm x 16.0mm
Input Line Frequency:	50/60 Hz

CERTIFICATION MARKS

PACKING LIST

TMT-9000PS 2	Power Supply

M SERIES – TIP CARTRIDGES

The post TMT-9000PS-2
Soldering Iron Power Supply 220v appeared first on SMT Solder Tips.

TMT-9000PS-1 Soldering Iron Power Supply 110v

admin — Thu, 30 Apr 2020 20:42:07 +0000

High thermal recovery & performance.
13.56MHz power supply with built-in LCD display.
Dual switchable soldering ports.
No calibration or operator training required.
No additional coil assembly costs.

TMT-9000S SPECIFICATIONS

Input Line Voltage:	TMT-9000PS-1	100-110 VAC
	TMT-9000PS-2	220-240 VAC
Tip to Ground Potential:	2mV, true RMS 50-500Hz
Tip to Ground Resistance:	<2 Ohms DC
Idle Temperature Stability:	+/- 1.1°C (2°F)
Ambient Operating Temperature:	10-40°C (50°F -104°F)
Maximum Enclosure Temperature:	50°C (122°F)
Fuse:	TMT-9000PS-1	125V 1A
	TMT-9000PS-2	250V 0.5A
Output Power (Maximum):	40 Watts RF
Output Frequency:	13.56 MHz
Size (W x H x D):	212.4mm x 118mm x 132mm
Weight:	3.47 KG
LCD display:	60.0mm x 16.0mm
Input Line Frequency:	50/60 Hz

CERTIFICATION MARKS

PACKING LIST

TMT-9000PS	Power Supply

M SERIES – TIP CARTRIDGES

The post TMT-9000PS-1
Soldering Iron Power Supply 110v appeared first on SMT Solder Tips.

TMT 9000S2 – MX-500S-21Soldering Station

admin — Thu, 30 Apr 2020 20:25:59 +0000

The TMT-9000-S2 is based on Curie Heat Technology which responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material. TMT-9000-S2 Voltage 220 – 240v.

High thermal recovery & performance.
13.56MHz power supply with built-in LCD display.
Dual switchable soldering ports.
No calibration or operator training required.
No additional coil assembly costs.

TMT-9000S SPECIFICATIONS

Input Line Voltage:	TMT-9000PS-1	100-110 VAC
	TMT-9000PS-2	220-240 VAC
Tip to Ground Potential:	2mV, true RMS 50-500Hz
Tip to Ground Resistance:	<2 Ohms DC
Idle Temperature Stability:	+/- 1.1°C (2°F)
Ambient Operating Temperature:	10-40°C (50°F -104°F)
Maximum Enclosure Temperature:	50°C (122°F)
Fuse:	TMT-9000PS-1	125V 1A
	TMT-9000PS-2	250V 0.5A
Output Power (Maximum):	40 Watts RF
Output Frequency:	13.56 MHz
Size (W x H x D):	212.4mm x 118mm x 132mm
Weight:	3.47 KG
LCD display:	60.0mm x 16.0mm
Input Line Frequency:	50/60 Hz

CERTIFICATION MARKS

PACKING LIST

TMT-9000PS	Power Supply
SHH-1	Soldering Handpiece Holder
SHP-1	Soldering Handpiece
RMP-1	Tip Removal Pad
SG-1-HRB	Heat Resistant Grip
SG-1-GR	Handpiece Grip Green
SG-1-GY	Handpiece Grip Gray
BC-1	Brass Curls
SPG-1	Sulphide Free Sponge
M7CH176	Soldering Tip Cartridge

The post TMT 9000S2 – MX-500S-21
Soldering Station appeared first on SMT Solder Tips.

TMT 9000S1 – MX-500S-11Soldering Station

admin — Thu, 30 Apr 2020 20:14:16 +0000

The TMT-9000-S1 is based on Curie Heat Technology which responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material. TMT-9000S1 Voltage 100 -110v.

High thermal recovery & performance.
13.56MHz power supply with built-in LCD display.
Dual switchable soldering ports.
No calibration or operator training required.
No additional coil assembly costs.

TMT-9000S SPECIFICATIONS

Input Line Voltage:	TMT-9000PS-1	100-110 VAC
	TMT-9000PS-2	220-240 VAC
Tip to Ground Potential:	2mV, true RMS 50-500Hz
Tip to Ground Resistance:	<2 Ohms DC
Idle Temperature Stability:	+/- 1.1°C (2°F)
Ambient Operating Temperature:	10-40°C (50°F -104°F)
Maximum Enclosure Temperature:	50°C (122°F)
Fuse:	TMT-9000PS-1	125V 1A
	TMT-9000PS-2	250V 0.5A
Output Power (Maximum):	40 Watts RF
Output Frequency:	13.56 MHz
Size (W x H x D):	212.4mm x 118mm x 132mm
Weight:	3.47 KG
LCD display:	60.0mm x 16.0mm
Input Line Frequency:	50/60 Hz

CERTIFICATION MARKS

PACKING LIST

TMT-9000PS	Power Supply
SHH-1	Soldering Handpiece Holder
SHP-1	Soldering Handpiece
RMP-1	Tip Removal Pad
SG-1-HRB	Heat Resistant Grip
SG-1-GR	Handpiece Grip Green
SG-1-GY	Handpiece Grip Gray
BC-1	Brass Curls
SPG-1	Sulphide Free Sponge
M7CH176	Soldering Tip Cartridge

The post TMT 9000S1 – MX-500S-11
Soldering Station appeared first on SMT Solder Tips.