K Series Solder Tip Archives - SMT Solder Tips

K80CS005 Conical Sharp 0.5mm (0.02″) Solder Tip

admin — Thu, 15 Oct 2020 20:30:00 +0000

K80CS005 Datasheet

Technical Specifications

K80CS005
Conical Sharp 0.5mm (0.02″)
Tip Style:	Conical Sharp
Tip Width:	0.50mm (0.02″)
Tip Length:	11.80mm (0.46″)

80 Type Cartridge¹:	420°C – 475°C
RoHS Compliant² / Lead Free:	YES
For Use With:	TMT-2000PS, PS900 w/SHP-K, MFR-PS1100/MFR-PS2200 w/SHP-KM

Material Composition

Patented Color Band

All components are RoHS compliant and Lead-Free.

¹ Thermaltronics tip cartridges will typically idle within a temperature range of +/-1.1°C. However, there is variation in idle temperature across tip geometries within an individual temperature series. Thermaltronics offers a wide variety of tip geometries from 0.25mm fine point tip to 5mm chisel. The length and geometry of a tip will have an influence on the tip idle temperature. To accurately measure idle temperature it will depend greatly on the measurement method, technique and equipment used. Two different methods or the use of alternative equipment will produce different test results.
² Please refer to http://www.rohs.gov.uk for details on RoHS Compliance.

The post K80CS005
Conical Sharp 0.5mm (0.02″)
Solder Tip appeared first on SMT Solder Tips.

K80CP010 Conical Sharp 1.0mm (0.04″) Solder Tip

admin — Thu, 15 Oct 2020 20:26:56 +0000

K80CP010 Datasheet

Technical Specifications

K80CP010
Conical Sharp 1.0mm (0.04″)
Tip Style:	Conical Sharp
Tip Width:	1.00mm (0.04″)
Tip Length:	14.40mm (0.57″)

80 Type Cartridge¹:	420°C – 475°C
RoHS Compliant² / Lead Free:	YES
For Use With:	TMT-2000PS, PS900 w/SHP-K, MFR-PS1100/MFR-PS2200 w/SHP-KM

Material Composition

Patented Color Band

All components are RoHS compliant and Lead-Free.

The post K80CP010
Conical Sharp 1.0mm (0.04″)
Solder Tip appeared first on SMT Solder Tips.

K80CH050 Chisel Extra Large 5.0mm (0.20″) Solder Tip

admin — Thu, 15 Oct 2020 20:23:59 +0000

K80CH050 Datasheet

Technical Specifications

K80CH050
Chisel Extra Large 5.0mm (0.20″)
Tip Style:	Chisel
Tip Width:	5.00mm (0.20″)
Tip Length:	14.00mm (0.55″)

80 Type Cartridge¹:	420°C – 475°C
RoHS Compliant² / Lead Free:	YES
For Use With:	TMT-2000PS, PS900 w/SHP-K, MFR-PS1100/MFR-PS2200 w/SHP-KM

Material Composition

Patented Color Band

All components are RoHS compliant and Lead-Free.

The post K80CH050
Chisel Extra Large 5.0mm (0.20″)
Solder Tip appeared first on SMT Solder Tips.

K80CH025 Chisel 30° 2.5mm (0.10″) Solder Tip

admin — Thu, 15 Oct 2020 20:21:22 +0000

K80CH025 Datasheet

Technical Specifications

K80CH025
Chisel 30° 2.5mm (0.10″)
Tip Style:	Chisel 30°
Tip Width:	2.50mm (0.10″)
Tip Length:	10.30mm (0.41″)

80 Type Cartridge¹:	420°C – 475°C
RoHS Compliant² / Lead Free:	YES
For Use With:	TMT-2000PS, PS900 w/SHP-K, MFR-PS1100/MFR-PS2200 w/SHP-KM

Material Composition

Patented Color Band

All components are RoHS compliant and Lead-Free.

The post K80CH025
Chisel 30° 2.5mm (0.10″)
Solder Tip appeared first on SMT Solder Tips.

K80CH018 Chisel 30° 1.78mm (0.07″) Solder Tip

admin — Thu, 15 Oct 2020 20:18:54 +0000

K80CH018 Datasheet

Technical Specifications

K80CH018
Chisel 30° 1.78mm (0.07″)
Tip Style:	Chisel 30°
Tip Width:	1.78mm (0.07″)
Tip Length:	10.30mm (0.41″)

80 Type Cartridge¹:	420°C – 475°C
RoHS Compliant² / Lead Free:	YES
For Use With:	TMT-2000PS, PS900 w/SHP-K, MFR-PS1100/MFR-PS2200 w/SHP-KM

Material Composition

Patented Color Band

All components are RoHS compliant and Lead-Free.

The post K80CH018
Chisel 30° 1.78mm (0.07″)
Solder Tip appeared first on SMT Solder Tips.

K80CH015 Chisel 30° 1.50mm (0.06″) Solder Tip

admin — Thu, 15 Oct 2020 20:16:10 +0000

K80CH015 Datasheet

Technical Specifications

K80CH015
Chisel 30° 1.50mm (0.06″)
Tip Style:	Chisel 30°
Tip Width:	1.50mm (0.06″)
Tip Length:	10.40mm (0.41″)

80 Type Cartridge¹:	420°C – 475°C
RoHS Compliant² / Lead Free:	YES
For Use With:	TMT-2000PS, PS900 w/SHP-K, MFR-PS1100/MFR-PS2200 w/SHP-KM

Material Composition

Patented Color Band

All components are RoHS compliant and Lead-Free.

The post K80CH015
Chisel 30° 1.50mm (0.06″)
Solder Tip appeared first on SMT Solder Tips.

K80CH010 Chisel 30° 1.0mm (0.04″) Solder Tip

admin — Thu, 15 Oct 2020 20:11:24 +0000

K80CH010A Datasheet

Technical Specifications

K80CH010A
Chisel 30° 1.0mm (0.04″)
Tip Style:	Chisel 30°
Tip Width:	1.00mm (0.04″)
Tip Length:	10.00mm (0.39″)

80 Type Cartridge¹:	420°C – 475°C
RoHS Compliant² / Lead Free:	YES
For Use With:	TMT-2000PS, PS900 w/SHP-K, MFR-PS1100/MFR-PS2200 w/SHP-KM

Material Composition

Patented Color Band

All components are RoHS compliant and Lead-Free.

The post K80CH010
Chisel 30° 1.0mm (0.04″)
Solder Tip appeared first on SMT Solder Tips.

K80BV050 Bevel 45° 5.00mm (0.20″) Solder Tip

admin — Thu, 15 Oct 2020 20:06:42 +0000

K80BV050 Datasheet

Technical Specifications

K80BV050
Bevel 45° 5.00mm (0.20″)
Tip Style:	Bevel
Tip Width:	5.00mm (0.20″)
Tip Length:	15.00mm (0.59″)

80 Type Cartridge¹:	420°C – 475°C
RoHS Compliant² / Lead Free:	YES
For Use With:	TMT-2000PS, PS900 w/SHP-K, MFR-PS1100/MFR-PS2200 w/SHP-KM

Material Composition

Patented Color Band

All components are RoHS compliant and Lead-Free.

The post K80BV050
Bevel 45° 5.00mm (0.20″)
Solder Tip appeared first on SMT Solder Tips.

K75WV080 Hoof w/Dent 45° 8.00mm (0.12″) Solder Tip

admin — Thu, 15 Oct 2020 20:03:47 +0000

K75WV080 Datasheet

Technical Specifications

K75WV080
Hoof w/Dent 45° 8.00mm (0.12″)
Tip Style:	Hoof w/Dent
Tip Width:	8.00mm (0.31″)
Tip Length:	11.00mm (0.43″)

75 Type Cartridge¹:	350°C – 398°C
RoHS Compliant² / Lead Free:	YES
For Use With:	TMT-2000PS, PS900 w/SHP-K, MFR-PS1100/MFR-PS2200 w/SHP-KM

Material Composition

Patented Color Band

All components are RoHS compliant and Lead-Free.

The post K75WV080
Hoof w/Dent 45° 8.00mm (0.12″)
Solder Tip appeared first on SMT Solder Tips.

K75WV031 Hoof w/Dent 60° 3.10mm (0.122″) Solder Tip

admin — Thu, 15 Oct 2020 20:01:10 +0000

K75WV031 Datasheet

Technical Specifications

K75WV031
Hoof w/Dent 60° 3.10mm (0.122″)
Tip Style:	Hoof w/Dent
Tip Width:	3.10mm (0.12″)
Tip Length:	16.40mm (0.65″)

75 Type Cartridge¹:	350°C – 398°C
RoHS Compliant² / Lead Free:	YES
For Use With:	TMT-2000PS, PS900 w/SHP-K, MFR-PS1100/MFR-PS2200 w/SHP-KM

Material Composition

Patented Color Band

All components are RoHS compliant and Lead-Free.

The post K75WV031
Hoof w/Dent 60° 3.10mm (0.122″)
Solder Tip appeared first on SMT Solder Tips.